C5ALIVE Forum
C5Alive General Category => C5alive Information => Topic started by: C5 ENTHUSIAST + RESTORER on 23, September, 2015 - 19:14:50
-
Hi I started this restoration a few months ago but put it on hold as I had a c5 to restore for a member
So here it is beaing restored starting with the body
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/F2D194C7-137C-4356-AAAE-9423388A2998_zpseroeueeh.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/F2D194C7-137C-4356-AAAE-9423388A2998_zpseroeueeh.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/F8576D83-E5F7-4967-B07F-A0CB2B7A8A64_zpsujnkpubi.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/F8576D83-E5F7-4967-B07F-A0CB2B7A8A64_zpsujnkpubi.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/2D7F6BFF-F003-4603-9AD2-015163683B83_zps68sdui6k.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/2D7F6BFF-F003-4603-9AD2-015163683B83_zps68sdui6k.jpg.html)
Here is the serial number
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/CBB0F3E6-3046-4BAD-9CDA-402EB24F39D3_zps90ft2oyr.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/CBB0F3E6-3046-4BAD-9CDA-402EB24F39D3_zps90ft2oyr.jpg.html)
Also has anyone seen this label on a C5
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/FBA9DD46-C274-4DA0-A8EA-548E95991A62_zps6poc8skp.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/FBA9DD46-C274-4DA0-A8EA-548E95991A62_zps6poc8skp.jpg.html)
Ok now started the clean up
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/DF45DC28-0D13-4E24-B525-4F382674CE4A_zpsl52r52aw.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/DF45DC28-0D13-4E24-B525-4F382674CE4A_zpsl52r52aw.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/2721853E-1E03-4CEB-B460-A7ACAC11CA08_zpsdorq62w2.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/2721853E-1E03-4CEB-B460-A7ACAC11CA08_zpsdorq62w2.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/739E0945-AD79-4882-8082-F4972FBB4875_zpsz8ndlynv.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/739E0945-AD79-4882-8082-F4972FBB4875_zpsz8ndlynv.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/71FDF751-C664-4CB3-9992-B6795ED45B92_zpszwh4eabb.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/71FDF751-C664-4CB3-9992-B6795ED45B92_zpszwh4eabb.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/E80DB219-7901-4E0E-AE58-4F99261868AE_zpsotnpgbdd.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/E80DB219-7901-4E0E-AE58-4F99261868AE_zpsotnpgbdd.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/1E7812A1-22DE-4697-A118-1695C465D34B_zpsartka2ke.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/1E7812A1-22DE-4697-A118-1695C465D34B_zpsartka2ke.jpg.html)
As you can see its come up very nice but a lot of elbow grease but worth it
-
The next thing is to checkout the wiring harness ..
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/512522A3-D2F1-4814-8EC7-9F6561B8403E_zpsesrauzyl.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/512522A3-D2F1-4814-8EC7-9F6561B8403E_zpsesrauzyl.jpg.html)
Hi here as you can see that I checked out the harness control. Box and the pod before fitting the cable as it worked out all seems to be ok but as we know it will a few tests runs .anyway photos here
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/0821593B-9B33-4542-A9B4-0ECD6F461DA5_zpsrn1upu0u.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/0821593B-9B33-4542-A9B4-0ECD6F461DA5_zpsrn1upu0u.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-09/95C7EF4A-ACA8-4F40-8C5C-3AC77C44F7A1_zpshwxfcyok.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-09/95C7EF4A-ACA8-4F40-8C5C-3AC77C44F7A1_zpshwxfcyok.jpg.html)
-
Well the harness seem to be ok so fitted it into the tube on the body
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/CFFCE239-E9D7-4F51-88D3-26C85457C335_zpszljdmumm.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/CFFCE239-E9D7-4F51-88D3-26C85457C335_zpszljdmumm.jpg.html)
Started to connect the wiring up for the the indicators and the horn
Temporary conected the indicators to check to see if they work ...also connected the hazard warning switch
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/1976A303-00B4-4208-AF46-88AFA4F4B75E_zpshgusb1ua.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/1976A303-00B4-4208-AF46-88AFA4F4B75E_zpshgusb1ua.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/B21EF09B-ECFA-4F7E-B587-83DE70304E38_zpscsvu4st2.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/B21EF09B-ECFA-4F7E-B587-83DE70304E38_zpscsvu4st2.jpg.html)
-
Everything checked out ok so on with the build
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/19E7B84C-5149-4A12-B5CE-1DDC35B79708_zpsss02jbfa.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/19E7B84C-5149-4A12-B5CE-1DDC35B79708_zpsss02jbfa.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/67C81EEC-D572-4D35-AD5B-DBA607772015_zps0bgsljil.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/67C81EEC-D572-4D35-AD5B-DBA607772015_zps0bgsljil.jpg.html)
-
Startted on the indicators
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/CAF05DD3-655D-477A-BD65-2D20B4F9E2B6_zpspyrc1af6.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/CAF05DD3-655D-477A-BD65-2D20B4F9E2B6_zpspyrc1af6.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/51A03E61-F8AC-4D6B-9413-29C0DD855D0F_zpst4caqj2b.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/51A03E61-F8AC-4D6B-9413-29C0DD855D0F_zpst4caqj2b.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/91968086-3496-446B-ACA9-49038D3D3AC9_zpsizkyz2f3.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/91968086-3496-446B-ACA9-49038D3D3AC9_zpsizkyz2f3.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/0759758F-FC91-4261-BB85-2FD2D4F374C1_zps5ot2jefj.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/0759758F-FC91-4261-BB85-2FD2D4F374C1_zps5ot2jefj.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/58E808A9-51D0-47F2-BC86-75205A4DEEC1_zpsvejo4jl0.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/58E808A9-51D0-47F2-BC86-75205A4DEEC1_zpsvejo4jl0.jpg.html)
Now checking the indicators with my hazard warning switch Andj as You will ser them arę working great
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/6CFC712C-44A5-4F00-B150-3715D9AD5B97_zpsvw70eqwg.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/6CFC712C-44A5-4F00-B150-3715D9AD5B97_zpsvw70eqwg.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/A9A42890-9144-496F-BC9D-32F080FABED8_zps8umg97nx.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/A9A42890-9144-496F-BC9D-32F080FABED8_zps8umg97nx.jpg.html)
-
Great to see how its all done and coming along
Mark
-
Thanks
Mirrors fitted
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/8B3449A6-C84E-4266-88A7-A40D86CA0042_zpstlsnp4ba.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/8B3449A6-C84E-4266-88A7-A40D86CA0042_zpstlsnp4ba.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/452F758A-2D68-4474-A002-7136B1259F7F_zps4buwrk4z.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/452F758A-2D68-4474-A002-7136B1259F7F_zps4buwrk4z.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/49BF3BEF-1C0B-4363-A4B8-7E3921765894_zpslqvpgojv.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/49BF3BEF-1C0B-4363-A4B8-7E3921765894_zpslqvpgojv.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/DFFA5E74-3875-473B-ACFB-5D582856529F_zpspiaomuct.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/DFFA5E74-3875-473B-ACFB-5D582856529F_zpspiaomuct.jpg.html)
Looking good
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/767B42C3-14DB-40D4-9A7E-BA4A77335E66_zps8yevnfn5.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/767B42C3-14DB-40D4-9A7E-BA4A77335E66_zps8yevnfn5.jpg.html)
So next thing is the chassis build up.
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-04/F6E2EFC5-19AC-44EF-B082-73F236CEEC00_zps0b8bojrj.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-04/F6E2EFC5-19AC-44EF-B082-73F236CEEC00_zps0b8bojrj.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-04/D75C136E-5A6F-4C15-9D74-E4BDB21D6C40_zpsoqgvnjjz.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-04/D75C136E-5A6F-4C15-9D74-E4BDB21D6C40_zpsoqgvnjjz.jpg.html)
Herę is the hub its an 8 speed
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/9F78AF2B-5FD9-4EE5-BEDC-82DAD6BE76B1_zpsshqiagcl.png) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/9F78AF2B-5FD9-4EE5-BEDC-82DAD6BE76B1_zpsshqiagcl.png.html)
Herę is the gearing that i must chainge to Work what i want .(4 lower then 4 above the standed C5 rangę )
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/E791734D-C76C-4CD4-A8D4-25014C23A4BF_zpsmxtjmijj.png) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/E791734D-C76C-4CD4-A8D4-25014C23A4BF_zpsmxtjmijj.png.html)
The hub
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/E3890205-7B50-43E9-9ECE-6B79019CC94B_zpsh8km6ys0.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/E3890205-7B50-43E9-9ECE-6B79019CC94B_zpsh8km6ys0.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/ABC59DA2-72CD-445D-AF1B-741B81F97A8F_zpsxaapfggq.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/ABC59DA2-72CD-445D-AF1B-741B81F97A8F_zpsxaapfggq.jpg.html)
Started to check it to mąkę sure it is working
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/5359F0B5-597B-4C8C-9730-08B7526E392E_zpstsqyzpus.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/5359F0B5-597B-4C8C-9730-08B7526E392E_zpstsqyzpus.jpg.html)
-
OK nów for getting the gearing as i want it
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8B20AA4B-2685-4CBC-944F-7EF906B60F27_zpssehkkuuq.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8B20AA4B-2685-4CBC-944F-7EF906B60F27_zpssehkkuuq.jpg.html)
Just fitted some old wheel so that i can check the the gearing ..after a while i managed to get what i wanted (4 speeds lower and 4 above the standed C5 gearing ) by chainging the front sprocket to a smaler one also fitted a larger one on the hub
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-09/B9BDFDD3-E1C8-49F5-8FC5-F9E08718AA87_zpsazblb5am.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-09/B9BDFDD3-E1C8-49F5-8FC5-F9E08718AA87_zpsazblb5am.jpg.html)
-
Here is what I will be fitting
Here is what I will be fitting
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/5F0BB3FE-702D-4C98-87FD-348DC2017899_zpsinka5ib5.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/5F0BB3FE-702D-4C98-87FD-348DC2017899_zpsinka5ib5.jpg.html)
Right all sems to be ok so started fitting the front wheel ..
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/1372D854-E72B-4ABF-810A-4B37FBCEBFF0_zpsyef5plsm.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/1372D854-E72B-4ABF-810A-4B37FBCEBFF0_zpsyef5plsm.jpg.html)
All where's fitted
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/814C439A-E5B8-4EC7-AAFC-9B635791DB18_zpse61m7qkd.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/814C439A-E5B8-4EC7-AAFC-9B635791DB18_zpse61m7qkd.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/26EDF1D9-2430-492D-8264-3E67A6D3CE97_zps2kppurze.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/26EDF1D9-2430-492D-8264-3E67A6D3CE97_zps2kppurze.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/6068C294-86C2-4EA8-BA29-CD4966C76C6A_zpsfjmr5aqk.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/6068C294-86C2-4EA8-BA29-CD4966C76C6A_zpsfjmr5aqk.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/83CA1C13-9BB7-4C9E-88F3-F4CB6300EB0F_zpsdfvid2wl.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/83CA1C13-9BB7-4C9E-88F3-F4CB6300EB0F_zpsdfvid2wl.jpg.html)
-
Herę is the gearing i wanted
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-09/21252FDF-F287-4435-8B9B-0A7CD1418C22_zpshaupaczn.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-09/21252FDF-F287-4435-8B9B-0A7CD1418C22_zpshaupaczn.jpg.html)
-
Now time to put the body on .Also fitted the motor/drive belt large drive cog brake grips and the gear twist grip ..
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-07/D2EB88C2-2830-412C-A4E8-2AC23EB66E2A_zpscibjcg0i.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-07/D2EB88C2-2830-412C-A4E8-2AC23EB66E2A_zpscibjcg0i.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/CEA46C92-6681-435C-9184-99EC79F7E604_zps2vqjalfk.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/CEA46C92-6681-435C-9184-99EC79F7E604_zps2vqjalfk.jpg.html)
On a standed C5 The pedals go round once and the wheels go around twice ....
But with the hub on gear 1 the pedals go around once and the wheels go around 1.10 times
: : : :: 2 1.25. Times
3. 1.5. Times
4. 1.6. Times
5. 2.0. Times
So on and so on
-
Control box wired up and tested ....
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/8E4AD68E-54E6-4FDC-9D22-703B9EA2ACD2_zps2flwcz16.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/8E4AD68E-54E6-4FDC-9D22-703B9EA2ACD2_zps2flwcz16.jpg.html)
Next thing will be the back bar + the wheel trims will need cleaning then fitting a back brake light .
-
Ok stickers on the front and side now on also fitted the front wheel trims + the back bar cleaned sprayed and fitted
All stickers fitted also fitted the front wheel trims
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/4F69A743-458E-4E5B-B673-AF904452DB92_zpsjxt7itsz.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/4F69A743-458E-4E5B-B673-AF904452DB92_zpsjxt7itsz.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/FB4985D6-5C6E-45B1-9470-05DCC733B6E8_zpsfz8yspub.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/FB4985D6-5C6E-45B1-9470-05DCC733B6E8_zpsfz8yspub.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/C3A57470-5773-4910-A7A3-AC95554F0EAA_zpseti2jowd.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/C3A57470-5773-4910-A7A3-AC95554F0EAA_zpseti2jowd.jpg.html)
-
Now working on the back brake light
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/3A42D13A-E12F-48FB-AB91-0B221096E5B9_zpswlhwfy8x.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/3A42D13A-E12F-48FB-AB91-0B221096E5B9_zpswlhwfy8x.jpg.html)
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/8%20Speed%20C5/8%20Speed%20C5/BA711413-4983-4C38-B7E8-8A384C1D9BD8_zpsfrqjajow.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/8%20Speed%20C5/8%20Speed%20C5/BA711413-4983-4C38-B7E8-8A384C1D9BD8_zpsfrqjajow.jpg.html)
Now just got to fit it the bulb in the rear reflector ..
Ok I have now fitted the back light with a brake light .
The first photo is with the lights on
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/2014-01/2015-10/98FE6B56-DB5B-4640-8402-D88A197C5ABB_zpsqmkznldq.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/2014-01/2015-10/98FE6B56-DB5B-4640-8402-D88A197C5ABB_zpsqmkznldq.jpg.html)
Sec photo with the brake light on
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/2014-01/2015-10/6642186D-7450-4031-BFC5-0695A4895384_zpsmuecrsjc.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/2014-01/2015-10/6642186D-7450-4031-BFC5-0695A4895384_zpsmuecrsjc.jpg.html)
Third photo with the light on and the brake light on
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/2014-01/2015-10/FAF96DE6-4AA5-463F-B803-DFB1D9984DE8_zpsiidxgg3c.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/2014-01/2015-10/FAF96DE6-4AA5-463F-B803-DFB1D9984DE8_zpsiidxgg3c.jpg.html)
The photos where taken in day light
-
Just cleaned the rear wheel trims but will not fit until the C5 has been on a few test runs
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/2014-01/2015-10/34F0B8EF-4D90-4D64-AC43-ABEF185ECA7A_zpsvsowidlg.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/2014-01/2015-10/34F0B8EF-4D90-4D64-AC43-ABEF185ECA7A_zpsvsowidlg.jpg.html)
-
Boot cleaned and will be fitted later
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/C5%20rest/2014-01/2015-10/FD53B72B-81F3-4608-BC40-7C893A84F851_zpsd2qznxfp.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/C5%20rest/2014-01/2015-10/FD53B72B-81F3-4608-BC40-7C893A84F851_zpsd2qznxfp.jpg.html)
-
C
-
[
-
Herę is the gearing i wanted
(http://i1009.photobucket.com/albums/af214/TERESAMACH45/2015-09/21252FDF-F287-4435-8B9B-0A7CD1418C22_zpshaupaczn.jpg) (http://s1009.photobucket.com/user/TERESAMACH45/media/2015-09/21252FDF-F287-4435-8B9B-0A7CD1418C22_zpshaupaczn.jpg.html)
Hello.
I have the seam idea and so a few questions:
1) The Shmiano Nexus is with Model and it has a "back break"?
2) have you a photo of the hub-holder and how do you have fit it to the frame?
3) How many cogs have the 2Gear to transfer to the main axe, the gear on the main ae is the original or?
3b) where have you got this Gear and how do you fixed to the hub?
4) How many cogs have the gear from the Hub, I can get them from 16 to 23dents.
So far my first doubts :-).
Best regards.
Thorsten
-
Hi there it did have a back break but I took it off as it would not work as it was a back brake .
Regarding the fixing the hub to the frame I used a flat piece of metal as wide as the inside frame drilled and bolted it to the fram so it would not move two slots cut out to fit the hub axle c
I got the 8 speed hub off a bent wheel.
The drive cog was welded to the hub .
I will try and send some photos to you ..
Can you send me your email address
Bye Chas
-
Hi here is a photo of a 7 speed I fitted ..this is the way I do all of them ....
(http://i992.photobucket.com/albums/af46/jordan8_2009/2016-01/C776006D-770D-4ADC-BAA9-5C25C95C0743_37.png) (http://s992.photobucket.com/user/jordan8_2009/media/2016-01/C776006D-770D-4ADC-BAA9-5C25C95C0743_37.png.html)
-
Hello Chas,
Thank you for the information and photo.
my mail is t.hochstadt(AT)gmx.de
Where get you the gear cog for the transmission and how do you soldering it?
The metal profile that you us you made yourself and its witch metal (seems to be 3mm thick or?)
Why did you mount the hub from down in the holder, from Up the hub can’t fall down and I think the holder work better or?
Best regards.
Thorsten
-
Hi some more photos to follow
(http://i992.photobucket.com/albums/af46/jordan8_2009/2016-01/21994321-9B2E-4467-BFC8-CF5BBD694F1B_2.png) (http://s992.photobucket.com/user/jordan8_2009/media/2016-01/21994321-9B2E-4467-BFC8-CF5BBD694F1B_2.png.html)