C5ALIVE Forum
C5Alive General Category => C5 Chatroom => Topic started by: marra on 12, December, 2012 - 14:46:38
-
Hi all. Some pics of the steel drive cog . This is an exact fit to the correct tooth spec and numbers. Been busy milling, just have to press in the bearing and check all teeth are plotted correct. This has given me a migraine :P . I will drill out some holes to lighten the cog by 30% . getting there though.
(http://i892.photobucket.com/albums/ac121/marramarra/DSC01286.jpg)
(http://i892.photobucket.com/albums/ac121/marramarra/DSC01282.jpg)
And for those who remember the 36/72 v conversion ( named Turnip below ) , then the next has started to come off the drawing board ;D ..... Oh Dave , yes you can have a motor frame.
http://c5alive.co.uk/forum/index.php/topic,2016.0.html
-
Hi marra,
A MAGNIFICENT piece of work. :o :o
I just wish you wouldn't post such photos, you have me sat in the corner sobbing my eyes out because I'm not qualified to produce such nice work. :'( :'( :'(
-
Excellent mate 8)
-
Well done very good keep up the good work
Chas
-
Hi Craig,
just had a look at the link you posted, this is also a marvellous piece of work.
I wish
1. I could get away with such a machine here,
2. I could pay the prices you pay.
Sand blast and coat chassis, A frame and forks = £ 40
OMG, to have just the frame coated I was quoted €80, and that's without sandblasting. :( :( :(
-
I paid £65 for that job and that was in 2010.
-
I put allot of work their way, and sometimes its who you know. £40 is not the going rate, his price usually £55 - £60 depending on either a 5 or 10 day wait and when they do the color on other jobs. Grey for air commercial vents or other colours like the B+Q orange etc . Also since 2010 there are allot of companies being more realistic on their prices for competition as the country is in what could be described as ' A bit of a mess'.
-
Fantastic bit of engineering Marra - are you going to be selling some ?
-
Fantastic bit of engineering Marra - are you going to be selling some ?
I will be doing when they are finished , drilled + balanced and polished off bud.
TURNIP ? whats your next going to be called CARROTS ? i hated carrots and turnip as a kid
'Turnip 2' ;D .. Dunno dave, Ill think of something next time your in Wigan .
-
I have a milling machine and i am interested how you cut the teeth i do have an indexing head with it but i need guidance on how to use it i am a fridge eng by trade but i do like to play engineering i also have a lathe and tig welder but i am just a beginner with these tools. andy b