C5ALIVE Forum
C5Alive Forum - Archive Section => General Archive => Complete Archive => Welcome To The Forum => Topic started by: zigclair on 24, August, 2010 - 10:34:46
-
Hi All,
I'm Paul, after years of wanting one I finally got one... it was on ebay but only a mile down the road from me (leek, staffordshire) gave it a wash, pumped up the tyres, replaced a fuse and diode and i was away! already done a 10mile round trip without a fault, loving it!
The only thing she's short of is the wheel covers, I realise these are like hens teeth, but I own an advanced composites company (carbonmods.co.uk) and would be happy to remould the covers, colour matched in grp, I'm sure if these were available it might help a few people restore the original look, so if anyone has 1 cover and 1 centre cap, that they are prepared to sell/lend/hire to me that's in decent nick I would really appreciate it if you could let me know.
Look Forward to chatting to you all!
-
Hi there Paul I do have what you are looking for but I will need them back when you have finished with them just send me an email with your name and address and phone number and i Will get back to you bye Chas
-
Hi Paul and welcome to the forum - good luck with the wheel covers
-
Thanks guys,
Thanks already goes out to chas, hopefully I can help a few people out with replacements, obviously once I have the tools made i will get a better idea of the cost to reproduce them but I'm sure that they will be very reasonable... for those looking for bling i might have to make a set in prepreg carbon fibre!
Cheers, Paul
-
I looked into having the centre-caps reproduced recently by an injection moulding company but the cost was a little prohibitive.
I would definitely be interested in a re-fabricated set of trims / caps. (and if you did the front cover, one of those too!)
-
Welcome to the forum, and glad you are enjoying your C5 so much.
Retro Andy.
-
Thanks guys,
Thanks already goes out to chas, hopefully I can help a few people out with replacements, obviously once I have the tools made i will get a better idea of the cost to reproduce them but I'm sure that they will be very reasonable... for those looking for bling i might have to make a set in prepreg carbon fibre!
Cheers, Paul
I'm sure Matt would be up for a bling set for goldfinger :)
-
Your not wrong a nice gold set would be good :D
-
Injection moulding sure is an expensive thing to tool for, I'm considering making the centre cap using a vacuum casting process, this would accurately recreate the original part on all faces, it's a process used to prototype injection moulded parts, I think that the main wheel cover is possibly too big to make using this process, so it will be GRP, so the outside will look right but the inside will give them away as copies, but better than nothing! I suppose it'll give the anoraks out there great satisfaction if they spot it! I'll start a new thread when I start the project with photos of how it's all done, bore you guys mad I'm sure!
-
Hi there PAUL WHEEL TRIMS ON THERE WAY ..CHAS
-
Chas,
You're a legend, thanks. Paul
-
Injection moulding sure is an expensive thing to tool for, I'm considering making the centre cap using a vacuum casting process, this would accurately recreate the original part on all faces, it's a process used to prototype injection moulded parts, I think that the main wheel cover is possibly too big to make using this process, so it will be GRP, so the outside will look right but the inside will give them away as copies, but better than nothing! I suppose it'll give the anoraks out there great satisfaction if they spot it! I'll start a new thread when I start the project with photos of how it's all done, bore you guys mad I'm sure!
If you do manage to make a few spares, you are most welcome to sell them via the forum. Let me know once you've some more details and see what we can sort out :)
-
Once the moulds have been made it would be a shame not to help others out, so I'm sure I'll be able to make them available through the forum at a good price, exactly what the price is i don't know until i know just how much of a nightmare they are to make!
-
Knowing the c5, it won't be easy ;D
-
wheel covers now arrived, thanks chas for sorting me out so quickly, I'll set to work straight away, first off I think I will make the wheel cover and cap in a one piece grp moulding, and then a separate grp centre cap, to help people out if that all that missing, if that all goes to plan I will look to making exact replicas of the 2 components using a vacuum casting process, I'll keep you posted on the progress! I could be persuaded into making the front wheel cover too!
-
What about a body shell ;D
-
Lol John, beat me to it!
Definitely some front wheel covers, they dont even need to be exact most of the cover is "hidden" underneath the nose.
Happy days if this comes to fruition! Got my fingers crossed!
-
What about a body shell ;D
A carbon fibre bodyshell would be awesome,just fit a 1kw motor and away you go !!! (probably straight to Accident & Emergency :D ;D)
-
Hi there Paul any luck on the c5 wheel trims ...bye chas
-
Hi there Paul how is the wheel trim mouldings going on ...Any progress