C5ALIVE Forum
C5alive Marketplace => Wanted - Sinclair C5 Parts & Accessories => Topic started by: ScubaChris on 27, March, 2011 - 13:41:32
-
My latest trawl around for spare parts... Would any of you helpful guys have any of the following items going spare perchance?
* Boot inner container (plastic corrugated inner bit).
* Plastic 'U' retaining clip to stop boot hinges popping out (I have one but need another).
* 2 x plastic 'top hat' grommets to plug the holes at the top of the seat back (above the A frame).
* Front wheel cover (posted in another thread but I'm consolidating everything here).
* Mudflaps.
* Set of mirrors - used ones are fine as long as they have the brackets & bolts.
* 1 x plastic clip which fits into the rear of the frame and allows the control box to be screwed to it.
Pretty please??? :D
Updated on 9th April.
C.
-
Boot clips and your top hats are OK from me. :)
-
Top man, Craig ;D
I've dropped you an email.
C.
-
..there is a complete boot lid (minus the lock) for sale ;
http://c5alive.co.uk/forum/index.php?topic=1732.0
-
Hi, for the in-chassis plastic mounting clips, look at Moss Plastics web-site, then order a couple of samples ,like I did!
-
They are called ' Lokut nuts '
http://cgi.ebay.co.uk/Lokut-nut-snap-in-nut-trim-plastic-10-per-bag-/110656836149?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c3a95235
http://cgi.ebay.co.uk/Land-Rover-Floor-Screw-and-Plastic-Lokut-Nut-Set-/280600460530?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4155173cf2
-
Excellent... That looks close enough!
Thanks guys ;D
C.
-
I have lost one of my boot retaining clips :'( , will need replacing if anyone has a spare one ;)
Retro Andy.
-
Hi there Andy I have a spare boot clip just email me your address ..bye Chas
-
Many thanks Chas, will do :)
Retro Andy.
-
They are called ' Lokut nuts '
http://cgi.ebay.co.uk/Lokut-nut-snap-in-nut-trim-plastic-10-per-bag-/110656836149?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c3a95235
http://cgi.ebay.co.uk/Land-Rover-Floor-Screw-and-Plastic-Lokut-Nut-Set-/280600460530?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4155173cf2
Really struggling with this now... I tried ordering a bag of these off ebay (the 1st item, not the Land Rover one), but they are way too small and almost fall inside the hole. I think the holes in the chassis are around 9-10mm whereas the biggest lokut size I can find is around 7mm.
Oh well, have to keep searching!
Anyone know if the Land Rover ones are any bigger?
C.
-
Hi I will be posting the bearings to you today + also a set of plastic mounting clips they are smaller than the original but they will be ok..Just try and let me know ...bye Chas
(http://i992.photobucket.com/albums/af46/jordan8_2009/PICT0773.jpg)
-
That's fantastic Chas. ;D
If we meet at an event later this year then I owe you a beer...
C.
-
Hi, Chas I don't think I have got your e-mail address, so please send me a quick message:-
andrew.toop@btinternet.com,
Many thanks.
Retro Andy.