fully tested pod problem

[marcdonnelly]

Can anyone help me solve this problem just brought a c5 minus the pod i then put my tested pod by chas on it that works 100% and everything was perfect but then after about 10 minutes i noticed that the lights that go up and down to indacate speed and going up hills etc etc had stopped working and even going down a hill fast it still showed red on the pod.I  guessing theres a fault in the control box and wondered if anyone could tell me what diode was at fault thanks marc.

[radiomarty]

Hi it is most likely to be the op amp (358) or one of the transistors (poss t3) in the control box

[marcdonnelly]

Thanks for that i will ask plumber to have a look for me when he gets back of his hols ..I have a spare control box i will take it apart and try and find where the 2 items you mentioned are..

[marcdonnelly]

thanks can i buy those 2 from maplins etc etc and does you or anyone know the codes to order thanks again.

[PLOD11]

Both available at Maplins, don't have the codes at present.

If you change the Op amp, i find it a good idea to fit a socket to the PCB then plug the Op amp into it, just makes it easier to replace if you need to change it in the future.

John

[radiomarty]

Hey Plod great minds think alike I always do that too 

[aladds]

That's what I did with mine as well :-)