Going 24v : what's required ?

[minidaz]

Going on from my post in the For Sale section, i thought i'd give it it's own thread.

I take it with the controllers, going direct to 4qd is a good option, and would i be right in saying that it's the uni-8 24 that's the choice of sprint champions 

Obviously the controller is just part of what's required. Do 4qd do the throttle grips / wiring / all the bits and pieces to fit it, or would i need to purchase these from elsewhere ?

The need for speed is getting stronger 

[marra]

I bought the controller + base, cover and leads and magura throttle twist grip from 4 qd. you dont need the extra length conti fit ( imo ).

[PLOD11]

http://www.4qd.co.uk/prod/uni.html

http://www.4qd.co.uk/accs/pots.html#mag

All the user / fitting manuals are also there to download if you want to have a look prior to buying.


John

[Karl]

The need for speed is getting stronger 

...that will be down to the AER then 

Basically the Throttle , matching handgrip for the other side and controller are from 4qd

The battery clamps, wiring , fan ,additional heat soak etc are sourced elsewhere.

[minidaz]

...that will be down to the AER then 

Yep 

Might have to see about a 4qd order sometime soon, but does anyone know where i can get a decent set of battery clamps from 

Must admit i've never tinkered with the C5 electrics, but there's always a first.
And i know if i get stuck, there's a few experts on here 

[radiomarty]

Am looking into making up a harness to improve what is fitted to Goldfinger - if it works out ok your welcome to copy it - ps im just down the A14 if you get stuck bud 

[minidaz]

Cheers Marty