pod lights

Lancealot · 01, January, 2013 - 20:01:22

Hi Luke, the red cable loom has 9 wires connected to a 10 way connector.

You will not get a reply from Phil as he has left the C5 forum unfortunately but he left the POD replacement a freeware.

Lance

Luke S · 01, January, 2013 - 20:26:13

Quote from: Lancealot on 01, January, 2013 - 20:01:22
Hi Luke, the red cable loom has 9 wires connected to a 10 way connector.

You will not get a reply from Phil as he has left the C5 forum unfortunately but he left the POD replacement a freeware.

Lance

Thanks Lance

Has any one made one of these ULA replacement modules before, if so approximately how long would it that my dad to do

Luke S · 01, January, 2013 - 20:56:00

I have bought a pod off eBay hopefully it will work

Luke S · 02, January, 2013 - 18:47:14

Quote from: Luke Salsbury on 01, January, 2013 - 20:56:00
I have bought a pod off eBay hopefully it will work

The pod I bought is different to the picture on eBay according to the seller so it probably wont work

KarlG · 02, January, 2013 - 18:52:22

You were assured yesterday that it would work, why not wait and see.

Luke S · 04, January, 2013 - 15:02:31

Quote from: KarlG on 02, January, 2013 - 18:52:22
You were assured yesterday that it would work, why not wait and see.

It works!!!

But now the motor dose not work, dose any one know how to get round this problem

Luke S · 04, January, 2013 - 15:17:26

Also are the lights on the left hand side meant to flash when the c5 is not moving

Dave.76 · 04, January, 2013 - 16:19:08

Hi Luke

Sorry to hear you are having problems. As far as I know, the left hand set of LEDs shouldn't flash when stationary. They certainly don't on my C5. As far as I am aware only the outer set of orange LEDs on the left hand bank should stay on (not flashing) when the motor is not in use.

Luke S · 04, January, 2013 - 16:43:48

Year the 2 orange ones on the left hand side don't flash

Luke S · 04, January, 2013 - 16:45:21

May be it's flashing because the motor wont work. The motor works fine with the other pod but not with this one $:-\$ $:-\$

dansretropod · 04, January, 2013 - 16:56:10

QuoteThe motor works fine with the other pod but not with this one

Looks like your new POD is just as broken as your old one. Have you considered removing the POD and control box and just running your C5 from a relay? It'll save you all the hassle/cost of dealing with faulty ULA chips.

Luke S · 04, January, 2013 - 17:07:46

I'll just see if I can get my dad to look at it tonight

radiomarty · 04, January, 2013 - 17:20:04

Hi Luke- sounds like possibly another duff pod - the offer is still there if you want to stick them in the post to me I will see whats wrong with them for you - just cover the postage (£4 ish) - Marty

Luke S · 04, January, 2013 - 17:31:16

I'll talk to my dad when he gets home.
Can you swap ULA chips over between 2 pods $:-\$ $:-\$

dansretropod · 04, January, 2013 - 17:58:59

Yeah you can swap them over. Just be careful to handle them correctly and protect them from static.

News:

pod lights