Hi Everybody,
After my previous thread i got out the multimeter, jury rigged the fuses with some fuse wire and checked the control box...the problem was several bad connections/corroded switches.The lights now work and the motor switches on and off as it should...however there 2 problems.
Firstly the motor power is intermittent when i wiggle one of the small red wires on the pod (i will check for dry joints or corrosion later on) and i was wondering why ?? I thought the pod only monitored the battery power and motor load how can it effect the power to the motor ??
Secondly and much more importantly the pod does not light up ...what are my options here
I understand the ULA is no longer available...does ANYONE sell them
The engineer in work suggested an alternate source ...was this ULA used no any other device that i could salvage one from
Any ideas ?