Hello
Just done a lot of searching on here, checking and testing of the pods/control box, but still cant get the issue fixed! Hopefully someone might be able to offer some more advice:
C5 worked fine last month, i removed the body, swapped it over, fitted indicators etc and now the pod dosent light up when the ignition is on, also the throttle button dosent turn the motor. The lights work as do the indicators and horn.
Pod: Ive two pods, both dont illuminate, so i fitted them both to my other C5 and both illuminate spot on, so i think i can eliminate the pod as faulty.
Control Box: With ignition on - 12v on both motor wires (blk and red). 12V to x13 when microswitch pressed (goes to the relay), 12v to the main red cable on the relay. R1 12v in and 12v out. The chip, 12v on top connector, 0 in middle, 5v on bottom. Earth to the top left post connector. Diodes , like D1D3/D4, checked with ohmn meter, they seem to be fine and current flows one way.
Any extra ideas to check? Basiclly no pod lights, no clicking on relay despite pressing the micro switch and power going to X13.
Cheers for any advice. I dont really want to swap with my working C5 control box, just incase anything blows etc.