To be sure to does not burn something, i would verify the correct elecrical connections of my control box.
When i dismanted the c.b. i noted all the cables attached on it, so i drawn this picture:
i have some doubts:
1) X6 -> are the pin/sonds correctly connected ? Right pins 7/8 not connected ?
2) X7 -> Right N.C. ?
3) X5 -> is this the control box's on/off switch ? Must draw current from the key switch and apply to this pin to start the vehicle, right ?
Moreover i does not understand the real purpose of the metal plate that connect the X2-X3 pins ... is it possible to remove it and bolt both connectors (one over the other) directly on the X3 screw ?
Thanks to all for support !
Alex Bromo