As told in the welcome section, I'm trying to put on the road my C5.
I'm waiting for new tyres and tubes from a local bike shop, so this evening i went to the garage to see how to proceed and take some picture (sorry for poor quality, i used my mobile phone).
First of all: i washed the C5 using a strong degreaser (Resol) and a rough sponge, so now i discovered the underlying white !
Also the bar installed under the shell for two days has done the job, and the twist on the shield has finally been straightened.
Here are all the items I've found in the box:
the only item missing seems to be the battery cover, so i have two ignition switches hanging to the cables: i will build a sort of new cables to connect the battery (or batteries).
Finally i dismantled the power electronic and i discovered a point of fault at the connection of RED output motor cable:
For unknown reason, in that point the cable overheated and burned the PCB area, destroying also the near diode:
so must know the type of diode to replace it ! Then i will try to strengthen the burned printed circuit soldering it.
Below two ignition switches:
I believe that the blue cable is NEGATIVE and the brown is POSITIVE, right ?
Alex Bromo