C5ALIVE Forum
C5Alive General Category => C5 Chatroom => Topic started by: baselpat on 13, February, 2013 - 20:58:00
-
For the next few days only - my C5 has 2 motors, so I currently have a "Temporary Twin motor C5 hill climbing special". 24V 1450W total :o :)
(http://photos.cm7.ch/C5/Electrical/i-5P8ntFp/0/S/IMG_3748-S.jpg)(http://photos.cm7.ch/C5/Electrical/i-qVF2Phf/0/S/IMG_3750-S.jpg)
The existing 1200W Bosch motor is on the back, and a newly installed 250W hub motor on the front.
Old/Current 1200W:
(http://photos.cm7.ch/C5/Electrical/i-mhCxtNP/0/S/IMG_3756-S.jpg)
New 250W Hub
(http://photos.cm7.ch/C5/Electrical/i-pLZJCdB/0/S/IMG_3751-S.jpg)
The plan is to now take off the 1200W motor (completely illegal road wise - this thread has more about that (http://c5alive.co.uk/forum/index.php/topic,2609.msg23512.html#msg23512)) and just leave the new hub motor.
I now plan to post a new thread about installing the hub motor, including the bit of prep work needed, in the next days.
Pat
-
superb work 8)
-
Great
-
Will be watching out for that thread as it's something I'd be tempted to do purely for hill climbing as I can't physically get the C5 up most of the roads round here, or get moving again at some junctions.
I had thought about a second motor from a mobility scooter, but there are some technical issues to resolve which really isnt within my comfort zone, but a hub motor could do the job nicely.
-
Hi there what if the C5 was only able to go say at 6mph would that be a problem ....
Chas
-
6mph wouldn't be a problem for me - it's only to get uphill and hill starts
-
Ok I will look in to it ....bye Chas
-
Hi Mhurt I have started to work on the 6/7 mph C5 Gearbox and will post photos when there is something to post at the moment I am having a 12 tooth internal gearbox insert made up but will have to wait for the HTD Pulley to arive before it can be drilled out and fitted to the insert .....Bye Chas