C5ALIVE Forum
C5 Help => C5 Support => Topic started by: ScubaChris on 17, May, 2011 - 12:25:13
-
Hi all,
I was just wondering what the availability is like for replacement sprag (one way) bearings of the type found in the centre of the main drive cog? I've posted a picture below to show the one I mean. I have a couple already but both are missing a roller and it would be good to find a replacement. I'm assuming these are hard to come by now?
Sprag bearing:
(http://i1095.photobucket.com/albums/i471/ScubaChris1972/C5_SpragBearing.jpg)
I don't mean the other one which is a simple 2-way roller bearing and sits inside the motor mount as these seem much easier to find:
(http://i1095.photobucket.com/albums/i471/ScubaChris1972/C5_RollerBearing-1.jpg)
Cheers,
C.
-
They are the German INA brand HFL 2026 , about £14. + vat + delivery ............
........ OR , £10 delivered from me ;D new in sealed pack.
The original were the INA, the one you pictured with the red sleeve is the cheap Chinese replacement.
(http://i892.photobucket.com/albums/ac121/marramarra/DSC00948.jpg)
-
That's fantastic ;D
I've sent you a mail...
C.
-
Marra - if you have enough of these , you're welcome to place an advert in the market place section .I'll expect I'll be needing a few of these myself when I get round to restoring a few more c5's ;)
-
I would also be interested in a couple of these, if have more 8)
-
Also haley bearings in bury st edumds sell these priced at £12.00 each plus postage £2.00 for 1,2 or 3 product code is HFL 2026.... TELEPHONE 01284 750550 i myself have purchased these and the c5 works a treat.( (these are very slightly different inside the bearing but work well.)