Just fitted the tested, "no more nails" free motor and gearbox to my latest C5, with replacement brushs.
When i press the go button, i get a slight buzzz from the relay in the control box as the motor starts to turn and the leds on the pod dim at the same time. This is only briefly but not had it happen on either of the other C5s here.
Once the motor is running it is fine, its just when starting from cold (this is while on the workmate)
I was wondering if its the motor drawing to much current or the relay is on its way out.
I will try another motor on it in a day or two to see if i am getting the same problem.
The motor turns freely and has just been stripped down and serviced.
Any thoughts