C5ALIVE Forum
C5alive Marketplace => The Chas section => Topic started by: C5 ENTHUSIAST + RESTORER on 24, May, 2012 - 18:27:34
-
Hi all .Just had some new inserts made out of the original Plastic insert and a metal toothed pulley
Two of the plastic inserts where posted to me from members and I thank them .
If there are interested in buying one I will give them a discount .
The inserts will be posted for sale on The Chas section later on...Take a look at the photo
(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP2178.jpg)
-
Now that is a good use for some worn parts...some superb recycling 8)
-
Thanks Karl .
The inserts have had the teeth cut off then drilled out . The metal pulleys have been cut down and made to fit a 18 mm belt and pushed in the insert , Then a hole is drilled and a pin pushed through ..making them very strong ....(You can see one of the pins in the first insert )
No more worn teeth .....
The next thing I will be doing is to have the 3 pins made up (the one's that the small cogs fit on) Also going to have at having the 3 small cogs made ....I have already had the the large cog made up out off aluminum.. Photo's to follow
-
Hi Chas - how about offering a repair service for peoples worn cogs ?
-
Thanks Yes you right I could offer a repair service but before that I need to put them on a C5 and just check them out ....I sure they will be up to it but I will test them out all the same ..And if it goes ok I will have more inserts made up for sale
Bye Chas ........
-
That may help the one that I melted trying out the current tranducer.
Lance
-
As soon as they have been tested I will be offering an exchange service as long as it is only the teeth that are worn down ..
Let me know if anyone is interested in them ...Bye Chas
-
Me - depends on cost though....................... :o :o :o :o :o :o :o
Lance
-
Hi there Lance the cost would be £38.00 + postage ...+ the old insert ....
bye Chas