Topic: My next restoration/project will be a 24 volt C5

[C5 ENTHUSIAST + RESTORER]

Hi there sorry I will not be selling any of the motors I need them myself sorry .....Chas

[Jonny]

Will you be selling any of these 24v conversions?

[C5 ENTHUSIAST + RESTORER]

Regarding the 24v Batmobile going to fast I have had another toothed drive pulley drilled out and fitted to the motor .This one has 24 teeth the old one had 30 giving me a top speed of about 35 mph (to fast) .Now the new one has decreased the speed to about 25 mph and given more torque . I Also increased the acceleration on the controller (There was a delay). Just needs another run out....Photo's to follow ....

[C5 ENTHUSIAST + RESTORER]

Here is a video of the indicators .....Bye Chas

http://www.youtube.com/watch?v=Zh8UWpyuH5w

[radiomarty]

They look really good Chas - may put a set on Goldfinger as it only has fronts atm - Marty

[Lancealot]

Hi Chas how have you got the POD LED's setup are they also working with voltage or current or just as indicators.

I take it the outer amber are battery voltage connected.

Lance

[C5 ENTHUSIAST + RESTORER]

Hi there Lance The pod LEDs are just for the indicators if they are on  they will flash Left and right or both if the hazard switch is on  ..But I have fitted one amber on each end as a power indicator ...

If any one is interested in the back indicators here is where I got them from bare in mind they are not flush fitting and the body needs to be cut out ...and I changed the bulbs to led ones ... The other 3 digit LED one's are for the current and the voltage

EBAY No   190599586444

[kamilb1998]

EBAY No   190599586444

Here's the link - http://www.ebay.co.uk/itm/190599586444?ru=http%3A%2F%2Fwww.ebay.co.uk%3A80%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp3984.m570.l1313%26_nkw%3D190599586444%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1

[C5 ENTHUSIAST + RESTORER]

Hi there Dave will get back to you with what you want later today ...
bye Chas