Author Topic: POD failure part x (Read 3233 times)

Ton C5 · « **on:** 02, February, 2013 - 15:57:53 »

One of my C5 has a pod with a fried resistor R21
i am unable to find a layout or plan of the pod.
is it worth a try ? the rest looks okay

C5 ENTHUSIAST + RESTORER · « **Reply #1 on:** 02, February, 2013 - 16:30:20 »

You will find it is a common fault on the pod ...It will need replacing ...

Chas

Ton C5 · « **Reply #2 on:** 02, February, 2013 - 16:42:13 »

Yes but with what ?
and will it be enough to replace only the resitor or is it wise to replace more ?

C5 ENTHUSIAST + RESTORER · « **Reply #3 on:** 02, February, 2013 - 16:50:56 »

What I would do is to replace the burnt out resistor then Clean all the contacts then check the pod out ...R21 is a 10R resistor

Chas

Ton C5 · « **Reply #4 on:** 03, February, 2013 - 15:38:47 »

Okay 10 R ? uhhh, i might not be the sharpest knife in the block but do you mean 10 K ohm or just 10 ohm

btw i jus got the engine working

cleaned en greased and that did the job

C5 ENTHUSIAST + RESTORER · « **Reply #5 on:** 03, February, 2013 - 16:03:11 »

Hi there 10 R is 10 ohm
Chas

News: