Print Page - Control box external connections.

Title: Control box external connections.
Post by: alexbromo on 11, December, 2010 - 16:30:11

To be sure to does not burn something, i would verify the correct elecrical connections of my control box.

When i dismanted the c.b. i noted all the cables attached on it, so i drawn this picture:

(http://img221.imageshack.us/img221/7050/controlbox.jpg)

i have some doubts:

1) X6 -> are the pin/sonds correctly connected ? Right pins 7/8 not connected ?
2) X7 -> Right N.C. ?
3) X5 -> is this the control box's on/off switch ? Must draw current from the key switch and apply to this pin to start the vehicle, right ?

Moreover i does not understand the real purpose of the metal plate that connect the X2-X3 pins ... is it possible to remove it and bolt both connectors (one over the other) directly on the X3 screw ?

Thanks to all for support ! :)

Alex Bromo

Title: Re: Control box external connections.
Post by: alexbromo on 14, December, 2010 - 10:08:46

:(

Alex Bromo

Title: Re: Control box external connections.
Post by: Karl on 14, December, 2010 - 10:17:10

Sorry Alex - I just dont have the answer :-\

Title: Re: Control box external connections.
Post by: alexbromo on 14, December, 2010 - 13:26:17

Quote from: BooBoo on 14, December, 2010 - 10:17:10
Sorry Alex - I just dont have the answer :-\

Well, as they say "sperimentare necesse est!" ;D

Alex Bromo

C5ALIVE Forum

C5 Help => C5 Support => Topic started by: alexbromo on 11, December, 2010 - 16:30:11