Hi all had a little time on my hands so decided to make some centre caps . As you can see they look OK .The only thing is the 3 screws holding them on ,but it's the only way I could do it , but unlike the original ones you would not loose these ones .. (The screws are chrome plated brass so no rust )
The first is the original
(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0471.jpg)
(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0473.jpg)
As you can see I have not used an old Centre cap ...
(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0474.jpg)
I know you are good Chas, but I can't spot the difference, the two pictures are the same aren't they ?
Retro Andy.
Hi Andy you are to quick for me ..Just uploaded the correct one .....Bye Chas
Just had a little time on my hands so I decided to make some more ..
(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0476.jpg)
They may look flat but they are not they are concave just like the original ones
Hi Chas,
just a thought.
If you glue a small piece of tin plate on the rear of the covers you could then just place a neodymium magnet on the extremity of the axle, this way you can do away with the screws. ;) These magnets are readily available, in all shapes and forms, in the IN.
Whatever happens only use a small magnet otherwise you'll never get the cap off. ;D
Cheers. KarlG
How much are they Chas?