Print Page - METAL GEARBOX INSERT

Title: METAL GEARBOX INSERT
Post by: C5 ENTHUSIAST + RESTORER on 29, September, 2011 - 10:43:46

Hi all just had the gearbox inserts finished ..

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0878-1.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0862-2.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0861.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0863.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0870.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0872.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP0856-1.jpg)

The body is made aluminum and the tooth sprocket is steel (will never wear out ).But it could be removed and a cog fitted in it's place if that is what you wanted ...

I have the same gearbox fitted to my 24 volt c5 and it works OK no problem.
But i do not drive it full on .
so there is no guarantee on the gearbox or your motor as it is the way you use it that counts ....

Title: Re: METAL GEARBOX INSERT
Post by: Pyrasanth on 29, September, 2011 - 12:22:02

Hi Chas,

Are you selling some then ? If so how much buddy

Thanks

Title: Re: METAL GEARBOX INSERT
Post by: Lancealot on 29, September, 2011 - 15:56:29

Nice one Chas, just as our conversation you have done it, I have also emailed you.......

Lance

Title: Re: METAL GEARBOX INSERT
Post by: PLOD11 on 29, September, 2011 - 19:56:54

I want one as well for my 24volt project ;D ;D ;D ;D

Title: Re: METAL GEARBOX INSERT
Post by: thedesigntailor on 29, September, 2011 - 20:10:16

So... are these good for increasing reliability?

Are they worth getting on a 12v?
Are they easy to fit for a dunce like me?
How much?
What's the meaning of life?

:D

Title: Re: METAL GEARBOX INSERT
Post by: Jonny on 29, September, 2011 - 20:17:48

i'll take one if there's any left :) does the pulley on there work with the c5 belt and pulley?

Title: Re: METAL GEARBOX INSERT
Post by: C5 ENTHUSIAST + RESTORER on 30, September, 2011 - 08:20:42

Hi there drive pulley on the new gearbox has the same amount of teeth as the original and the belt will fit as normal ..
Regarding fitting..It can be easy but you must know what you are doing with it..
But it's not for a beginner

I am at the moment I'm making some Gearbox pullers which will make it easy and safer to dismantle the gearbox .
Will post post photos when they are made ....

Title: Re: METAL GEARBOX INSERT
Post by: C5 ENTHUSIAST + RESTORER on 30, September, 2011 - 08:25:25

Hi could you please let me know if you want the gearbox insert then I can get a price for a job lot

bye Chas

Title: Re: METAL GEARBOX INSERT
Post by: radiomarty on 30, September, 2011 - 09:23:15

Hi Chas - I would be interested in 1 maybe two depending on cost :) :)

Title: Re: METAL GEARBOX INSERT
Post by: PLOD11 on 30, September, 2011 - 10:56:16

Chas
Put me down for one 8)

John

Title: Re: METAL GEARBOX INSERT
Post by: Jonny on 30, September, 2011 - 17:12:22

put me down for one too :)

Title: Re: METAL GEARBOX INSERT
Post by: plumber on 01, October, 2011 - 14:37:36

hi there chaz can i have one too many thanks the plumber

Title: Re: METAL GEARBOX INSERT
Post by: C5 ENTHUSIAST + RESTORER on 04, October, 2011 - 07:26:59

Hi there I do not have your email address to contact you ....Chas

Title: Re: METAL GEARBOX INSERT
Post by: Jim on 04, October, 2011 - 16:10:24

Wow, I had been wondering about getting one of those made, nice work. Am very interested but depends on price? Jim :)

Title: Re: METAL GEARBOX INSERT
Post by: becks on 04, October, 2011 - 18:13:17

how much are these i wonder?

Title: Re: METAL GEARBOX INSERT
Post by: PLOD11 on 04, October, 2011 - 19:13:43

Chas has e mailed those who showed an interest ..... 8)

Title: Re: METAL GEARBOX INSERT
Post by: Karl on 08, October, 2011 - 10:08:48

Now advertised on Ebay as ;
http://www.ebay.co.uk/itm/SINCLAIR-C5-METAL-GEARBOX-INSERT-/220870371316?pt=LH_DefaultDomain_3&hash=item336ce667f4

Title: Re: METAL GEARBOX INSERT
Post by: C5 ENTHUSIAST + RESTORER on 08, October, 2011 - 10:44:12

If anyone is interested let me know before they are sold on Ebay .

The price for one on the C5 site would be £60.00 inc large bearing and posting .

Bye Chas

Title: Re: METAL GEARBOX INSERT
Post by: Lancealot on 22, October, 2011 - 16:54:47

Hi Chas,

Back from my holiday. Please advise if you still got one, thanks

Lance

C5ALIVE Forum

C5alive Marketplace => For Sale - Sinclair C5 Parts & Accessories => Topic started by: C5 ENTHUSIAST + RESTORER on 29, September, 2011 - 10:43:46