Text only | Text with Images

C5ALIVE Forum

C5alive Marketplace => The Chas section => Topic started by: C5 ENTHUSIAST + RESTORER on 15, August, 2012 - 21:32:35

Title: My next restortion and conversion to 24 volt for Paul
Post by: C5 ENTHUSIAST + RESTORER on 15, August, 2012 - 21:32:35
As you can see I'v just started another restoration and a conversion to 24volt for Paul ..

As you can see it looks ok until you start to strip things down  ...Take a look at the short video on youtube and you can also see my other videos
Just click on the link below

(http://i992.photobucket.com/albums/af46/jordan8_2009/1-IMGP2372.jpg)

http://youtu.be/1vOmbtV95VA

Photobucket
  (http://i992.photobucket.com/albums/af46/jordan8_2009/th_1-RESTORATIONFORPAUL.jpg) (http://s992.photobucket.com/albums/af46/jordan8_2009/?action=view&current=1-RESTORATIONFORPAUL.mp4)
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: Karl on 16, August, 2012 - 17:02:23
That should keep you out of mischief for a while  :)
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: C5 ENTHUSIAST + RESTORER on 18, August, 2012 - 14:57:05
You are right Karl I need to do more restorations ....

Anyway here is a bit more of the same .Frame sorted out and front metal wheel and steering bar fitted
..(http://i992.photobucket.com/albums/af46/jordan8_2009/1-IMGP2401.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/3-IMGP2399.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/2-IMGP2398.jpg)

The back plate made up with the back brake caliper fitted

(http://i992.photobucket.com/albums/af46/jordan8_2009/3-IMGP2420.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/2-IMGP2418.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/1-IMGP2415.jpg)
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: PLOD11 on 18, August, 2012 - 18:16:46
I LIKE THE VENT HOLES UNDER THE MOTOR !   :)
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: C5 ENTHUSIAST + RESTORER on 18, August, 2012 - 18:46:13
Thanks but what you cannot see is the slot  under the axle cut out and bent down to direct the air up to the motor .... but it will still need a powerful fan that I have and it's rated at 120 cf/min ...
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: C5 ENTHUSIAST + RESTORER on 19, August, 2012 - 21:26:33
Just added a few things on to it ...New/back and front brake cables. The speed controler and also wired up the motor and fitted the heat senser  that will cut out all the power if it gets to hot And you will see a new chain and chain tensioner with guides to stop the chain from coming off ....Also connected the controler up to the batteries and tested the wiring it all worked well
Will be working on the body next .



(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP2421.jpg)
Title: Re: My next restortion and conversion to 24 volt for Paul
Post by: C5 ENTHUSIAST + RESTORER on 24, August, 2012 - 08:57:29
Just cleaned the body and it looks great ...and fitted it to the frame and did a little work on the electrics ..

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP2424.jpg)

(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP2425.jpg)


(http://i992.photobucket.com/albums/af46/jordan8_2009/IMGP2431.jpg)
Text only | Text with Images