Print Page - buzzer sound..... have i connected everything correct????

Title: buzzer sound..... have i connected everything correct????
Post by: hammy on 19, November, 2012 - 21:28:45

i have just re-connected my control box, and, after connecting all the wires etc, all i get is a buzzing sound when the button is pressed
The pod lights up fine but have i one something wrong??
i am using a battery charger 12v, connected to the control box
i am using the original key switch assembly which i believe is ok, could this be the problem?

The motor has been serviced and is fine
the pod is fully working and so is the control box

Any ideas

Title: Re: buzzer sound..... have i connected everything correct????
Post by: radiomarty on 19, November, 2012 - 22:06:42

Hi Hammy -The buzzer sound is probably your relay pulsing in the control box as the charger can not give out the start current drawn by the C5 - im sure there is a post on here where this happened before - you will need to run it from a battery or you risk causing damage to the electronics - Marty

Title: Re: buzzer sound..... have i connected everything correct????
Post by: radiomarty on 19, November, 2012 - 22:13:53

http://c5alive.co.uk/forum/index.php/topic,1421.msg11076.html#msg11076

Title: Re: buzzer sound..... have i connected everything correct????
Post by: MattC5 on 19, November, 2012 - 22:30:22

http://c5alive.co.uk/forum/index.php/topic,1396.msg10808.html#msg10808

Title: Re: buzzer sound..... have i connected everything correct????
Post by: KarlG on 19, November, 2012 - 23:20:05

One other possible source of buzzing is that battery chargers have no smothing and have a ripple output.

C5ALIVE Forum

C5 Help => C5 Support => Topic started by: hammy on 19, November, 2012 - 21:28:45