Print Page - Dead C 5

Title: Dead C 5
Post by: rekooh99 on 27, April, 2013 - 16:40:27

I ve just connected a battery to the C5 and nothing ,no pod lights no motor or lights battery is well charged and was connected the right way through the battery top and key switch, help!!!

Title: Re: Dead C 5
Post by: radiomarty on 27, April, 2013 - 17:45:30

Hi If you have access to a meter check you have 12v between the blue wire - and the brown wire + in the control box -this will confirm the key switch is ok - next check the two fuses are ok -Marty

Title: Re: Dead C 5
Post by: rekooh99 on 29, April, 2013 - 12:14:28

Thanks marty only got a basic continuity tester but will have a go with that , both fuses are ok

Title: Re: Dead C 5
Post by: Karl on 30, April, 2013 - 08:25:41

I agree with Marty, those keyswitch assemblies can be a bit of pain (thats why we made the c5alive wiring kits).
http://c5alive.co.uk/index.php?com=shop&display=product&id=15

I'd spray the workings of the switch with contact cleaner/wd40 etc and give it all a good wiggle..

Title: Re: Dead C 5
Post by: rekooh99 on 30, April, 2013 - 09:15:29

Karl didnt you make a harness without a pod and control box using a relay at one time? I would be interested in buying that if you made one up .Meanwhile wd40 and wiggling. ;D

C5ALIVE Forum

C5 Help => C5 Support => Topic started by: rekooh99 on 27, April, 2013 - 16:40:27