rear axell bearings

[plumber]

hi there.....having problems in getting the bearing off the rear axell...and didnt want to be to hard on it
so can any one help....how does it come off  .....the big hammer iching to be used...lol

many thanks the plumber

[radiomarty]

Best to use a 'puller' if you can get hold of one.

Regards Marty

[Karl]

like Umpa says - use a proper puller.

The axle is hollow so could get damaged if you start using big hammers

All mine get done by a mate who works in a local garage using a proper machine - saves a lot of hassle. There must be a garage local to you that could help ?

[radiomarty]

like Umpa says - use a proper puller.

- We are not one and the same even though we have not been seen in public together for a while !

[Karl]

Sorry Marty, a definate case of "night duty-itis" - (joys of being woken up by the noise of a chainsaw)  I must remember to keep away from the keyboard until I'm properly awake 

...in my defence I had just been reading a posting by umpa 

[Karl]

Plummer - this is a piccie of the axle assembly;



Am I right in thinking you want to change the bearing shown ?

If so, it just slides off when using a proper bearing press - the last one I had done by my mate was two years ago so I'm happy to be corrected. I don't have any memories of it causing us any grief , seemed quite straight forward . We didn't encounter any snags such as having to remove those components on the end.

[plumber]

many thanks to you all...........got bearing off ....i didnt know how to get that bush off,but it pressed on...many thanks for you help

the plumber