Set of mirrors

[ScubaChris]

My latest trawl around for spare parts... Would any of you helpful guys have any of the following items going spare perchance?

* Boot inner container (plastic corrugated inner bit).
* Plastic 'U' retaining clip to stop boot hinges popping out (I have one but need another).
* 2 x plastic 'top hat' grommets to plug the holes at the top of the seat back (above the A frame).
* Front wheel cover (posted in another thread but I'm consolidating everything here).
* Mudflaps.
* Set of mirrors - used ones are fine as long as they have the brackets & bolts.
* 1 x plastic clip which fits into the rear of the frame and allows the control box to be screwed to it.

Pretty please??? 

Updated on 9th April.

C.

[marra]

Boot clips and  your top hats are OK from me. 

[ScubaChris]

Top man, Craig

I've dropped you an email.

C.

[Karl]

..there is a complete boot lid (minus the lock) for sale ;
http://c5alive.co.uk/forum/index.php?topic=1732.0

[coverman]

Hi, for the in-chassis plastic mounting clips, look at Moss Plastics web-site, then order a couple of samples ,like I did!

[marra]

They are called ' Lokut nuts '

http://cgi.ebay.co.uk/Lokut-nut-snap-in-nut-trim-plastic-10-per-bag-/110656836149?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c3a95235

http://cgi.ebay.co.uk/Land-Rover-Floor-Screw-and-Plastic-Lokut-Nut-Set-/280600460530?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4155173cf2

[ScubaChris]

Excellent... That looks close enough!

Thanks guys 

C.

[Retro Andy]

I have lost one of my boot retaining clips  , will need replacing if anyone has a spare one 

Retro Andy.

[C5 ENTHUSIAST + RESTORER]

Hi there Andy I have a spare boot clip just email me your address ..bye Chas

[Retro Andy]

Many thanks Chas, will do 

Retro Andy.

[ScubaChris]

They are called ' Lokut nuts '

http://cgi.ebay.co.uk/Lokut-nut-snap-in-nut-trim-plastic-10-per-bag-/110656836149?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c3a95235

http://cgi.ebay.co.uk/Land-Rover-Floor-Screw-and-Plastic-Lokut-Nut-Set-/280600460530?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4155173cf2

Really struggling with this now... I tried ordering a bag of these off ebay (the 1st item, not the Land Rover one), but they are way too small and almost fall inside the hole. I think the holes in the chassis are around 9-10mm whereas the biggest lokut size I can find is around 7mm.
Oh well, have to keep searching!
Anyone know if the Land Rover ones are any bigger?

C.

[C5 ENTHUSIAST + RESTORER]

Hi I will be posting the bearings to you today + also a set of plastic mounting clips they are smaller than the original but they will be ok..Just try and let me know ...bye Chas

[ScubaChris]

That's fantastic Chas. 

If we meet at an event later this year then I owe you a beer...

C.

[Retro Andy]

Hi, Chas I don't think I have got your e-mail address, so please send me a quick message:-
andrew.toop@btinternet.com,
Many thanks.

Retro Andy.