News:

C5alive filming with "oldgoldtech.com" at Brooklands Museum - 13th November 2010
http://c5alive.co.uk/forum/index.php?topic=1440.0

Main Menu

Estimated cost of a 24V conversion?

Started by kamilb1998, 28, August, 2012 - 20:47:15

Previous topic - Next topic

kamilb1998

Seriously considering this right now. What are the estimated costs for a whole kit assuming I manage to fit it myself? Was there a stronger gearbox developed by C5 Alive for 24V conversions in the end?

radiomarty

4qd controller and twist grip come in at around £130 if I remember correctly  :)

Lancealot


kamilb1998

That's not bad. I'll be looking further into this in the near future. Would there be any way of running the lights on a 24V conversion?

PLOD11

You should be able to connect the lights circuit to just the one 12 volt battery ..

C5 ENTHUSIAST + RESTORER

Hi there the wiring that I make has outputs for 12volt and 24volt so you could use either .I run the controler + the  fan and a volt meter on 24 volts and the lights/horn and the indicators from the 12 volt side also the heat sensor I connect to the  the relay that is also run on 12 volt So if the motor gets to hot it will cut out the power and will shut down...all

Lancealot

Hi I am running everything 24v just change the bulbs to 24v. Just remember POD will not operate.

Keep it simple.

Lance

kamilb1998

Could the POD not be made to function on the separate 12V circuit?

Lancealot

Hi,

Not at the moment as various functions (input & output signals) come / goto the control box via the 10 core red cables.

I am looking at an alternative at the moment but just don't have the time.

I did start with an electronic circuit that did the 24v battery monitoring which got made up.
http://c5alive.co.uk/forum/index.php/topic,1610.msg16821.html#msg16821

I have nearly finished working on the boby shell and will start with the chassis / electronics but it will not be until october.

Lance

kamilb1998

I'll be needing new batteries in the next couple of weeks - mine are dying to the point they are close to struggling with the commute. After this, I'll be saving up for a 24V kit. Just one question;

If, once converted to 24V, I have a longer journey to do and complete it at 12-15mph, will I get the same range as I would get running on 12V?